The push tap is a new generation of faucet that is very practical. This faucet helps us save water and use water in the right place.
There are different types of push taps that you can follow this article to the end to know more about it.
>Pressure valves usually have a chrome-plated brass body. In this type of valve, a one-way flow causes the valve to open and the return of the same flow causes the valve to close, in simpler terms, push taps are one-way taps subsets. This type of tap prevents destroy to parts of the tap.
In push taps, there are two opposing forces that cause the tap to open and close.
In this type of tap, there is a part that is responsible for m adjusting the pressure of the water tap.
At such a time, the water pressure is adjusted by this part of the push taps to increase or decrease the amount of water released and prevent water wastage.
The fundamental components of push taps include the following:
In terms of appearance, push taps are divided into two categories: normal and digital or timer. Normal push taps are normal and open and close with hand pressure, but timed push taps are automatic and usually take between 5 and 25 seconds to open and close. Timed push taps start working intelligently with a digital eyepiece. Timed push taps are mostly used for schools, restaurants and large places with a lot of traffic.
>Remember that push taps are different from pressure reducing taps.
It is true that push taps cause the water pressure to decrease, but push taps regulate the amount of water pressure, while the reducing tap only reduces the amount of water pressure, and this is the main difference between push taps and reducing valves.
>Direct or normal push taps are small and proper for homes.
>Mostly for high flows and stable control, pilot pressure flow is used.
>Diaphragm push taps are mostly used in constructions.
The location of push tap is one of the most important issues that must be addressed.
push taps should be placed and installed parallel to the water pipes. It may be interesting to know the reason why the push taps are parallel to the water pipes. In case the push taps and water supply pipes are parallel, if one of the taps fails, the other tap will come into action and take over its work.
The push taps are closed one after the other in a system and make the adjustment of water pressure in several stages and save water use.
push taps may not reduce usage here, but the pressure of the water coming out of the tap will decrease.
Usually, water faucets are installed by companies and sales agencies, but if you want, you can install push taps yourself because it is an easy task.
First, remove the push taps from the packaging and it is better to clean them to remove the writing or labels from the pressure taps. Then check the direction of the arrow of the water flow and the direction of the arrow of the pipe so that they are in harmony with each other. The pressure difference between the top and bottom of the push taps causes the force to return to the front, also reinforcing and supporting the pipe is essential.
Note that there is an open space around the tap so that you can turn or open and close the valve. Tighten the screws of the push taps enough to make sure that it is closed and strong.
Keep the distances from where you install the tap to the surface where the valve is installed and around it so that the pressure valves are not damaged during use.
Due to the fluctuations of the market, the cost of pressure valves cannot be accurately stated, and depending on the model of push taps you choose, the cost of pressure valves will also be different. You can purchase pressure valves from reputable sites and agencies.
Usually, the cost of push taps is written accurately in catalogs and reliable valve production sites.
Remember that most valve companies also offer after-sales service and warranty to their customers, which is better to use.